Rear Window Defroster/Defogger Tab Bonding Repair Kit 2000
Thumbnail 1Thumbnail 2Thumbnail 3Thumbnail 4Thumbnail 5Thumbnail 6

Rear Window Defroster/Defogger Tab Bonding Repair Kit 2000

4.4/5
Product ID: 45398670
Secure Transaction

Details

  • Brand
    Frost Fighter
  • Model Name
    FF2000
  • Item Weight
    0.01 Ounces
  • Specification Met
    General Motors
  • Voltage
    12 Volts (DC)
80% silver for max conductivity
🔧DIY easy repair
⏱️fast curing adhesive

Description

❄️ Fix your defroster tabs like a pro—stay clear, stay warm, and never miss a morning commute!

  • DIY DEFROSTER REVIVAL - Simple application lets you fix separated tabs yourself—no costly glass replacement needed.
  • ENGINEERED FOR HIGH AMPS - Specifically designed to handle high amperage, guaranteeing reliable defroster tab repairs every time.
  • RAPID CURE LASTING BOND - Two-part adhesive sets quickly, delivering a durable, aggressive bond that stands the test of time.
  • SILVER POWERED CONDUCTIVITY - Over 80% silver content ensures lightning-fast electrical flow for flawless defroster performance.
  • SEAMLESS GLASS COATING ADHESION - Bonds aggressively to both glass and defroster coatings for a perfect, professional finish.

The Frost Fighter Rear Window Defroster Tab Bonding Repair Kit 2000 features a high-silver-content adhesive designed for quick curing and strong, conductive bonds. This easy-to-use two-part system restores electrical connections on defroster tabs, preventing costly glass replacements and ensuring reliable defrosting performance on 12V automotive systems.

Specifications

ManufacturerFrost Fighter
BrandFrost Fighter
ModelFF2000
Item Weight0.01 ounces
Product Dimensions1 x 3 x 3 inches
Item model number5841757416
Is Discontinued By ManufacturerNo
Manufacturer Part Number2000 (Duplicate SKU)
OEM Part NumberFF2000
Voltage12 Volts (DC)

Have a Question? See What Others Asked

Will it cure in cold weather without applying heat?
The line to the grid on my Wrangler back window popped off. Will this work to reattach it?
Can you use this to repair solder connections for antena
Can this be used to "repaint" the tab area on the glass? Mine is gone.

Reviews

4.4

All from verified purchases

H**O

Works, but it helps to heat cure

I used this product to repair the defroster on a 2018 Chevy Volt. One of the defroster tabs detached from the rear windshield. Because the frame covers much of the connection area, soldering equipment would not fit in there, and the shop said they would have to replace the windshield (several hundred dollars at a minimum).The Frost Fighter stuff is kind of expensive, but that may be because it is 80% silver, and it seems to be formulated to be very conductive when cured. Using a multimeter on the leftover epoxy on the mixing card gives a good continuity check. The defroster tab is very large on the Volt, but there was enough epoxy to do potentially a couple of repairs.I followed the directions pretty closely, mixing the two parts for about 45 seconds before application. I applied the mixture to the contact area on the windshield and on the tab. Using a heat gun, I warmed the area to about 130F, as measured with a non-contact thermometer, for 30 minutes. The epoxy didn't really start to hold until about 15 to 20 minutes in, so for this particular situation it was necessary to wedge something over the tab to keep it firmly in place. After the heat cure was complete, I tested the defroster and verified it heated up. Then, as per the instructions, I mixed up a bit more epoxy and applied it along the edges of the tab to such as to build up the conduction path between the defroster grid and the tab. Another 30 minutes with the heat gun finished up the operation.The defroster is now functioning, and I will be observing how well the repair holds up to the vibration of driving. In any case, it was much less expensive than replacing the windshield!The photos show the defroster connection area with the trim panels removed, before and after the repair. The thin gap limited the ability to apply the epoxy smoothly, but that area is not visible with the trim panels installed anyway.

A**R

It worked

This product worked very well. I glued my wiper back to my windshield and so far it's holding very well

C**M

Worked!! - F-150 rear slide window connectors

My 2017 F-150 was the sliding rear center window - for years the center sliding window would not defrost but the rest of the rear window would defrost. I found that the connector had come loose. Ford said I would have to replace the entire rear window because they do not repair this!Followed directions and it is working just fine!I left the mixed portion in a small cup to monitor how it dried -- this is some tough stuff, my little stirring stick would not come out of the epoxy once it was dry.ALSO - Just use a small dab! If you use too much and press the rubber piece back on it could ooze and cause cross contact on the + and - terminals!A little expensive but A LOT cheaper than a new window!!

S**3

A pain to get on and dry

It works well but it takes much longer than directionms state to dry had to leave rear window open and unwired for two days and ity was in 90's for those days but once it hardened seems to be holding well and defroster works so thats a win, was also able to use to repair a broken line and a thin spot where original was connected its definitely conductive

A**R

Works

It will work if you follow the instructions do on hot day in sun or use heat gun soild as can be

J**N

Worked great, so far

Worked really well, so far. We’ll see if it stands the test of time. Functionally works so much better than the auto parts store product. Downside is the price, seems very over priced. I had a lot let over.

D**Y

IT WORKS

I returned some of the "other" stuff to the local auto parts store after in failed, and went all in on this product. And I've been very happy with that decision. Worked the first time and is still working to this date. Now going on several months. The auto parts store brand never even made it past 1-day.

D**E

Adhesive failed under 2 years

Worked real well after following instructions to get it installed for my two rear connectors for the Jeep. No issues up to this past week the defroster did not work. I checked both connectors and the adhesive failed on both. Contemplating on spending another $50 so may have to find an alternative

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Imran F.

Very reliable shop with genuine products. Will definitely buy again!

2 weeks ago

Yusuf A.

Fantastic experience overall. Will recommend to friends and family.

1 month ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving over 300 million shoppers across more than 200 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.
£60.40

Duties & taxes incl.

UKstore
1
Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Fatima A.

Best international shipping I've ever tried. Worth every penny!

3 days ago

Neha S.

Excellent communication throughout the order process. Product is perfect.

2 weeks ago

Rear Window Defroster Defogger Tab Bonding Repair Kit 2000 | Desertcart GB