CHAMBERLAIN Clicker Keyless Entry KLIK2U-P2, Works with Chamberlain, LiftMaster, Craftsman, Genie and More, Security +2.0 Compatible Garage Door Opener Keypad, White

I had an old, 30-year old Genie garage door opener that used DIP switches to set the security code, with a very old KLIK2 (no suffixes) that worked with it; I absolutely loved the keypad, and wish I could have kept it. But when I replaced the garage door opener this week with a new Genie 3155D unit this week, I could not for the life of me reprogram the old KLIK2. So I ordered a new one, hoping that it would support the newer garage door openers and technology. I took the new KLIK2U-P2 out of the box, promptly went to the garage, followed the instructions given, and on the first attempt of programming it, the garage door was going up and down as expected!!!!Although I have only had it for a day so far, I'm back to loving this unit. This unit uses four (4) digits for the code, which is sufficient for my needs. The Genie keypad defaults to 3 digits, but can go up to 8 digits. But as I was replacing an earlier version of this device, I did not have to drill any new holes into the wood by the garage door.That said, I also hope this lasts as long as the previous unit; again, I had nothing against the previous unit, other than I could not program it for the new garage door opener. Time will tell if the build quality is as good, if not better. I will update this review if anything changes. (Don't hold your breath.)

Works great with my other systems. Love the universal aspect.

Works great with my new garage door opener. Easy to program.Only drawback is that the "door" slides up (rather than flips up on a hinge like my old one), so it had to be installed on the trim instead of the siding, because the door hits the siding overlap and it can't open enough to get to all of the keypad.

Easy to install and works like a charm. I'd have called it easy to program and given it 5 stars, but:To "pair" the remote with the opener, you have to identify the latter. I have a Chamberlain opener and there are apparently 3 generations of these. You must identify which one is running your door, and the included instructions (which are quite clear) say to identify its generation by noting the color of the "learn" button. In my case that didn't work; my unit's learn button is orange, which should mean it's a generation 2 machine. In fact it's a gen. 3 and failed to work until I disregarded the instructions and entered '3' instead of '2' when programming the remote. So: if yours isn't working and you have a Chamberlain opener, try a different number.

Works as described

This is the best way to make sure my garage is closed and secure! Unlike a clicker, you can't open the door unless you know the code.

I have an old Sears Craftsman garage door opener (GDO). So old, that it uses dip switches -- it doesn't have one of those "learn" buttons that you use to link it to a GDO keypad. I bought this KLIK2U-P2 because it claims to be "universal", and also claims that it works with these old dip-switch openers. When it arrived, the lettering on the box said KLIK2U-P2, but a sticker added to the side of the box indicated KLIK2U-P2MC. Turns out that the "MC" is a recent release, which allows the user to change the frequency of the emitted signal.The included instructions all referred to a learn button. However, the instructions also stated that it would work with a dip switch type of opener, and they provided a link to a pdf file (114A5072.pdf) on the Chamberlain web site. So, I entered the link into a browser - took me to the Chamberlain site - but the page stated 404, file not found. I checked VERY carefully to ensure that I had typed the (long) link correctly - and I had (if you doubt me, read on).So, I Googled, and found an older user manual for the KLIK2U-P2. That manual included detailed instructions about how to program it to work with old, dip switch, GDOs. I followed the instructions very carefully. Most importantly, when you are programming the keypad, you have to enter the ID number of your GDO (so the keypad will know what kind of signal it needs to send, to activate the GDO). For my old GDO, that ID number was 11 (note, that has 2 digits). It didn't work. I tried several times, no joy. I did notice two things. First, when programming the keypad, after entering the ID code (11) followed by the pound sign, the lights on the keypad started flashing like crazy - it looked to me like an error signal - the keypad was telling me that I had done something wrong. Second, after I had (supposedly) completed the programming, and tried to activate the GDO, the keypad lit up, but that was all. The GDO did nothing at all.So, just for the hell of it, I decided to try some of the GDO ID codes listed in the instructions that came with the keypad. They listed 9 different GDO IDs, covering a bunch of different types of GDO. Note that those codes were 1 through 9 - all single-digit. When I tried those, I immediately noticed two things. First, during programming, when I entered a single-digit ID code followed by the pound sign, the keypad did NOT start flashing like crazy. Second, after I had completed the programming, and tried to activate the GDO by entering my PIN, the keypad lights blinked very rapidly for about 5 seconds - as if it were sending a signal to the GDO. My GDO didn't activate (presumably because it didn't recognize the signal), but I think that - unlike when I used a 2-digit ID code - the keypad had accepted the programming.So now I called Chamberlain tech support. The person there told me her instructions for the keypad didn't say anything about dip switches, and didn't contain any link to a pdf file. So I emailed her a photo of the instructions that I had received with the keypad, and she confirmed that the link took her to the chamberlain 404 page. So, without any doubt, the instructions that came with the keypad are WRONG. She then googled, and found the same older manual that I had found. We went through the programming several times. No joy. Although she was pleasant, she clearly didn't understand how these things work. First, she got the dip switch instructions wrong (I had to correct her). Then, when I told her that I was calling her from inside my house, she INSISTED that you had to be in the garage when you programmed the keypad to work with dip switches. I told her that, before calling Chamberlain, I had tried to program the keypad several times, some of which were in the garage. And I explained that you had to program the keypad in the garage ONLY if you're using a learn button on the GDO because, in that case, when you press the learn button, the GDO sends a signal that the keypad can detect - so yes, in that case the keypad has to be close by. However, when you're trying to set up the keypad up to work with a dip switch GDO, you do NOT need to be nearby when programming it, because all you are doing is telling the keypad what signal to transmit (obviously, you need to be in range in order to use it!). I told her about the difference in keypad behavior when I used a 1-digit ID code. She refused to even consider the possibility that the keypad would not accept a 2-digit GDO ID code. She kept telling me that the old instructions said that I should use an ID code of 11. I told her that I knew that, and that I'd tried using that code about 3 hours ago, and had used it several times during our 30-minute phone call, and IT DIDN'T WORK.Bottom line is that, as of Jan 2023, the KLIK2U-P2MC does not work with old, "non-learn", dip-switch-only GDOs. I've returned it, and have ordered a different "universal" keypad that - like the KLIK2U-P2 - claims to work with dip switch GDOs. Let's hope that that one works.

The media could not be loaded. Easy install and setup. Just read the directions fully and carefully. I had the purple learn button on my overhead and the instructions worked exactly as stated and only took me 15-20 minutes at most. I agree with others that stated it’s odd there is no enter button and the slide cover instead of the flip I’m a little uncertain of. I live in a development so maybe it’s good mine is different from the rest. I also like that this came in white. It blends in better. The original one was a gray/tan color. When closed it doesn’t necessarily look like a keypad.